Matching
|
|
|
|
|
|
1.
|
end
butt joint
|
|
|
2.
|
edge
butt joint
|
|
|
3.
|
biscuit joint
|
|
|
4.
|
dowel
joint
|
|
|
|
|
|
5.
|
Clamp
the two pieces of wood to be joined securely to the bench.
|
|
|
6.
|
Clamp
the two pieces together until the glue is dry.
|
|
|
7.
|
Lay
out the location of the joint on the adjoining wood surfaces.
|
|
|
8.
|
Apply
water-based glue to the slots and the surfaces.
|
|
|
9.
|
Create the slots for the biscuits.
|
|
|
10.
|
Insert the biscuits into the slots of the first piece and then fit the second piece to
it, shifting them slightly for alignment if necessary.
|
|
|
11.
|
Adjust the fences of the machine for vertical location of the slots and for depth of
cut.
|
True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
12.
|
A
biscuit joint does not require glue.
|
|
|
13.
|
In
making a butt joint, the butt ends must be square.
|
|
|
14.
|
The
butt joint is not an especially strong joint.
|
|
|
15.
|
Screws grip better in cross grain than they do in end grain.
|
|
|
16.
|
In
making an edge dowel joint, choose dowel rod that is a little more than half the thickness of the
stock.
|
|
|
17.
|
A
dowel rod should usually not be longer than 1 inch.
|
Completion
Complete each sentence or
statement.
|
|
|
18.
|
Figure 8-2 (in workbook) shows how a(n) _____ block can be used to strenghten a butt
joint.
|
|
|
19.
|
What
type of wood is usually used to make dowel rod?
|
|
|
20.
|
Dowel
rod comes in diameters from 1/8 to _____ inch.
|
|
|
21.
|
Cut
the dowel rod short enough to allow about _____ inch clearance at each end of the
joint.
|
|
|
22.
|
To
make the dowels easier to fit into the holes, cut a slight _____ at each end.
|
|
|
23.
|
A
frame can be strengthened by installing one or more _____ at each corner.
|
|
|
24.
|
_____
are small metal pins that are used to match and mark the location of holes on the two parts of a
dowel joint. (two words)
|
|
|
25.
|
A
doweling _____ is a device that guides the drill to cut straight, perpendicular dowel
holes.
|