Matching
|
|
|
|
|
|
1.
|
adjustment nut
|
|
|
2.
|
bottom
|
|
|
3.
|
eccentric plate
|
|
|
4.
|
cam
|
|
|
5.
|
finger rest knob
|
|
|
6.
|
lever
cap
|
|
|
7.
|
lateral adjustment lever
|
|
|
8.
|
cutter
|
Completion
Complete each sentence or
statement.
|
|
|
9.
|
A(n)
_____ is a straightedge cutting tool used to shape and trim wood.
|
|
|
10.
|
To
make a very fine surface on open-grain wood such as oak, first plane the wood and then use a(n) _____
to remove the small imperfections left by the plane. (two words)
|
|
|
11.
|
Smoothing wood by rubbing it with an abrasive is known as _____.
|
|
|
12.
|
Garnet and aluminum oxide are two types of _____ that are used to sand
wood.
|
|
|
13.
|
The
type of warp shown in Fig. 7-2 (in workbook) is _____.
|
|
|
14.
|
The
type of warp shown in Fig. 7-3 (in workbook) is _____.
|
True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
15.
|
Most
wood is surfaced on all four sides at the mill.
|
|
|
16.
|
Always plane against the grain, never with it.
|
|
|
17.
|
On
the return stroke, the plane should be lifted.
|
|
|
18.
|
When
you plane the first edge, you should try to get the edge square with the face surface.
|
|
|
19.
|
When
planing a surface, apply pressure to the knob and handle as the plane starts to leave the wood
surface.
|
|
|
20.
|
When
using a belt sander, you should let the rear of the moving belt touch the workpiece
first.
|