Matching
|
|
|
Identify the parts of the bar clamp in Fig. 16.1 in your workbook.
|
|
|
1.
|
slide
|
|
|
2.
|
crank
handle
|
|
|
3.
|
screw
|
|
|
4.
|
frame
|
|
|
5.
|
bar
|
|
|
6.
|
pawl
|
|
|
7.
|
opening
|
|
|
8.
|
tip
|
|
|
a. | step
1 | e. | step
5 | b. | step
2 | f. | step
6 | c. | step
3 | g. | step
7 | d. | step
4 | h. | step
8 | | | | |
|
|
|
9.
|
Place
waxed paper on one side of the laminating form and stack the layers of veneer on it.
|
|
|
10.
|
Decide on the number of thicknesses needed.
|
|
|
11.
|
Cut
several pieces of veneer large enough and thick enough when combined to make the
project.
|
|
|
12.
|
Clamp
the halves of the form together and allow to remain under pressure for at least 24
hours.
|
|
|
13.
|
Place
waxed paper over the stack of veneers and place the other half of the form on top.
|
|
|
14.
|
Make
the form for laminating.
|
|
|
15.
|
Remove the lamination from the form.
|
|
|
16.
|
Spread good-quality glue evenly on both sides of each piece of inside layers and the
inside faces of the two outside layers of veneer.
|
Completion
Complete each sentence or
statement.
|
|
|
17.
|
__________ is a combining or uniting force that develops between an adhesive and a
piece of wood.
|
|
|
18.
|
A
wood piece that is used to hold work in place while glue is drying is known as a (an)
______________.
|
|
|
19.
|
What
type of clamp is shown in Fig. 16.2 in your workbook?
|
|
|
20.
|
__________ glue, which is made from animal parts, is used as an all-purpose furniture
glue.
|
|
|
21.
|
____________ cement is a two-part adhesive that can be used on wood, plastics,
leather, metal, ceramics, and other materials.
|
|
|
22.
|
________ is a waterproof glue that is made by mixing liquid resin with a powder
catalyst.
|
True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
23.
|
One
advantage of using white liquid-resin glue for an outdoor project is that it is almost completely
water-proof.
|
|
|
24.
|
Band
clamps are a good choice for holding a project suxh as a chair frame.
|
|
|
25.
|
Before gluing, you should dry-clamp all the pieces of a project together to make sure
the joints fit properly and that you have enough clamps for the job.
|